FältCom ECII Flex - Incoming Calls; 6.13 Incoming Calls

From phone:  301  < Code (max 10 digits) > #
4.
To verify the test alarm/routine call function:
From keypad:
From phone:
 300 #
Please view section 6.9 for priority order on test of receiver.
To delete the test alarm/routine call receiver, test alarm/routine call interval and test
alarm/routine call code:
From keypad:
From phone:
# 300 #
Secondary test alarm/routine call receiver
From keypad:
<Telephone number (max 20 digits)>
From phone:
 302  < telephone number (max 20 digits) > #
From keypad:
<Code (max 10 digits)>
From phone:
 303  < Code (max 10 digits) > #
To verify the test alarm/routine call function:
From keypad:
From phone:
 302 #
To delete the test alarm/routine call receiver, test alarm/routine call interval and test
alarm/routine call code:
From keypad:
From phone:
# 302 #
Incoming calls
It is possible to call the ECII™ Flex and talk to the trapped person. If there is only one ECII™
Flex on the line the unit can be set to answer immediately without selecting unit number; please
see section Single unit. If there are multiple units sharing the line each unit require a unique
number; number 1 is the default setting but can be changed, the ECII™ Flex can also be
blocked from receiving speech calls:
6.12.1 Multiple units on the line
1. For blocking the ECII™ Flex from incoming speech calls:
From keypad:
From phone:
# 140 #
Note: It is always possible to call the ECII™ Flex and program it even though it is
blocked for incoming speech calls. To prevent the ECII™ Flex from answering a call
change the number of ringing signals before the unit answers to 30, see section 6.14
below.
2. For activation and allowance of incoming calls:
162187 Manual FältCom ECII™ Flex Page 22 of 40