FältCom ECII Flex User Manual

Fältcom ECII
®
Flex
Manual
Version: 0.2.4-D

FältCom ECII Flex Specifications

General

Brand	FältCom
Model	ECII Flex
Category	Security System
Language	English

Summary

Product Description

4.1 Design and Function

Describes the physical and functional aspects of the lift phone unit.

Product Description (Continued)

4.2 Multiple Lift Phone Connection

Details connecting multiple units to a single telephone line.

4.3 Programming and Testing

Covers methods for programming and verifying settings.

Installation Instructions

5.1 Frame Mounting

Steps for mounting the lift phone frame and unit.

5.2 Mounting Behind Car Operating Panel

Instructions for mounting behind the car operating panel (COP).

Installation Instructions (Continued)

5.3 Connection to Alarm Button

How to connect the lift's alarm button to the unit.

5.4 Connection to Telephone Line

Steps for connecting the device to the telephone network.

Telephone Line Connections (Continued)

5.5 Connection of Voltage Supply

Requirements for external power supply and connections.

Programming

6.1 Configuration Settings

Prerequisites and initial steps for programming.

Programming (Continued)

6.2 Activation of Programming Mode

Procedures to enter and manage programming mode.

Programming Functions

6.3 Reset to Factory Settings

Restoring the device to its default configuration.

6.4 Clear All Active Alarms

Function to clear current alarm states.

6.5 Change of PIN Code

Modifying the PIN for remote access.

6.6 Alarm Receivers and Alarm Codes

Configuring alarm recipients and associated codes.

Programming Settings

6.8 Alarm Input Setting

Alarm Input Configuration

Alarm Input Configuration (Inputs 1 & 2)

Alarm Testing and Settings

6.9 Test of Alarm Reception

Procedures for testing alarm receiver functionality.

Alarm Testing and Delay

Alarm Receiver Testing and Delay Settings

Automatic Connections and Tests

6.12 Automatic Test Alarm/Routine Call

Function for automated testing of connections.

Incoming Calls

6.13 Incoming Calls

Incoming Calls Management

6.13.1 Multiple Units on the Line

6.13.2 Single Unit on the Line

Call Modes

6.13.3 Active Alarm Mode

6.14 Answering Time for Incoming Calls

Technical & Battery Alarm Receiver

Acknowledgement Functions

6.17 Disconnection of Acknowledgement

6.18 Acknowledge on End

Programmable Alarm Types

6.21 Programmable Alarm Types

Alarm Type Settings

Programmable Alarm Type Settings (Inputs 1-3)

Info Alarm Logging

6.22 Info Alarm – Logging of Alarms

End-of-alarm Function

6.23 End-of-alarm

End-of-Alarm Activation and Type Setting

Speech Messages

6.26 Speech Messages

Speech Message 1: For the Cabin

Speech Messages (Continued)

Speech Message 2: For the Alarm Receiver

Alarm Reception

7.1 Alarm Call

7.2 Acknowledging an Alarm

Steps to acknowledge and respond to an alarm.

Alarm Call Procedures

7.3 Ending a Call

7.6 Termination of Active Alarm Mode

Calling the Lift Phone

7.8 Calls to a Lift Phone

7.8.1 Multiple Units on the Line

Calling the Lift Phone (Continued)

7.8.2 Single Unit on the Line

7.9 Volume Control

Technical Data