Fält Communications 2016 ©
162187 Manual Fältcom ECII® Flex V024D 2016-02-23 Page 38 of 41
- Vandalism or intentional damage.
- Normal wear and tear.
Fält Communications AB reserves the right to determine if the product will be repaired or re-
placed. Warranty ceases to be valid if defects occur due to incorrect use, or other method of
application, or context than specified in this manual.
Fältcom ECII® Flex should only be used in the context for which it is intended. All other forms
of usage will be considered as being solely at the user’s own risk. Only suitably qualified per-
sons are permitted to install, program and start-up this product. Start-up is only allowed after
the product has been properly installed. As a consequence Fält Communications AB declines
all liability for possible defects, operational disturbance, accidents etc. caused by lack of
knowledge or carelessness on the part of the user. The same principle is valid for all unau-
thorized changes made to the product.
Fält Communications AB reserves the right to make changes to the product for functional or
commercial reasons. The company is not obliged to make immediate updates to reference
manuals.
10 Updates
Visit our web site to access the latest updates regarding market information and technical
documentation.
http://www.faltcom.com
11 Repair return procedure
Fält Communications AB only accepts returns that have a valid a RMA number. Please con-
tact Fält Communications AB support to recieve a RMA number.
Repaired products are sent back to customers as a regular post parcel with freight paid on the
assumption that the product is covered by warranty. If the investigation shows that the re-
turned product has no defects the customer is charged a service fee and freight. The custom-
er can ask for a quotation for repair of product not covered by warranty.
To Next Page
Loading...