FältCom ECII Flex - Alarm Call Procedures; 7.3 Ending a Call; 7.6 Termination of Active Alarm Mode

Fält Communications 2016 ©
162187 Manual Fältcom ECII® Flex V024D 2016-02-23 Page 37 of 41
8 Product label
Following is a description of the Fältcom ECII® Flex product label.
Liftphone Flex Unit
Part No 2187
Snr MCCCCC
www.faltcom.com
Rev z.z
W yyww
The product label describes:
Part No 2187: Product part number (order number)
Snr MCCCCC: Serial number of the device.
Rev z.z: Hardware revision of the product.
W yyww: Production year and month.
Label on the box.
Fältcom ECII
®
Flex COP
Part No 2187 Rev z.z
Snr MCCCCC W yyww
www.faltcom.com
The box label describes same information as above but has additionally the barcode:
EAN-128 indicating XXXXZZYYWWCCCCC
XXXX: Part number
ZZ: Hardware revision
YYMM: Production year and month
CCCCC: Serial number
9 Warranty
There is a 1-year warranty (12 months) from the date of delivery covering failure due to faults
in materials or the manufacturing process.
Warranty does not include:
- Incorrect or careless usage
- Damage caused by thunderstorms or air pollution.