FANATEC CSL E RW PS4 User Manual

24
In this window you can see the following informations:
• Currently installed and used PC* driver version
•
Currently installed and used rmware version on the CSL Elite Racing
Wheel
• Quick link to the Fanatec
®
homepage www.fanatec.com
Below the shown information there is the button ‘Update CSL E WB PS4
Firmware’. When pressing this button the rmware update process for the CSL
Elite Racing Wheel will be started (see more detailed description in chapter
‘Firmware update procedure’ below in this user manual).
7.1.2 Firmware update procedure
To initiate the rmware update the CSL Elite Racing Wheel rst has to be be
connected to the PC* by USB cable and then it has to be switched to Bootload-
er mode. You can switch to Bootloader mode in two different ways:
• by PC* driver, on page ‘Update’ press the button ‘Update CSL E WB PS4
Firmware’ when the CSL Elite Racing Wheel is switched ON, see previous
chapter ‘PC* driver’
• by pressing the ON/OFF button “
”
on the front plate of the CSL Elite
Racing Wheel for about 8 seconds when the CSL Elite Racing Wheel is
switched OFF.
When the Bootloader mode is active the
LED above the ON/OFF button “
”
will
be ashing blue. The cooling fan will also
switch off. On the PC* screen this window
will appear automatically as shown on
the right hand side:
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.

FANATEC CSL E RW PS4 Specifications

General

Brand	FANATEC
Model	CSL E RW PS4
Category	Video Game Controller
Language	English