25
Click on the upper button ‘Start rm-
ware updater’.
Then a new window will appear as
shown on the right hand side:
Connect to your CSL Elite Racing
Wheel by pressing the button ‘Con-
nect’.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.
When the Wheel Base Updater is
connected to the CSL Elite Racing
Wheel the buttons ‘Load Hex File’
and ‘Flash Firmware’ are available as
shown on the right hand side:
Use button ‘Load Hex File’ to browse
and select the wanted rmware le
(.hex). Usually the latest available
rmware found is already pre-select-
ed and this step can be skipped.
When the pre-selected rmware le
(.hex) is ok or the wanted rmware
le (.hex) is chosen press button
‘Flash Firmware’ to execute the rm-
ware update.
To Next Page
Loading...
Need help?
General
