5. Installation
5.3 Shifter
You do have several options to use the CSR Elite in combination
with a Fanatec Shifter:
• ClubSport Table Clamp V2 (shifter holder included)
• RennSport Wheelstand V2 + Shifter Set Adapter
• Shifter Set Adapter + individual cockpit solution
Connect the gear stick to the socket on the backside of your CSR
Elite Wheel. Use either the cable which came with your shifters (CSR
Shifter Set) or the short shifter cable and the PS/2 - RJ11 adapter
(Porsche Wheel Shifter Set).
Both mounting solutions provided by Fanatec give you the option to
mount the shifter either on the right or on the left side of the wheel.
Important: The 7GS must be calibrated before you can use it (6.3)
+
To Next Page
Loading...
