- The device must not be exposed to rain or humidity in order to avoid risk
of fire and the danger of electric shock.
- Operating temperature: 15°C – 35°C room temperature
- The maximum operation time of the wheel with continuous Force feed-
back activity is 1 hour. Let the wheel cool down for a few minutes before
you continue.
- Long playing may cause health risks. Take a break of 5 minutes every
20 minutes, and do not play for more than 2 hours per day.
- We strongly advise you to not drive a vehicle immediately after using a
video game.
- Utilization of the vibration and Force Feedback function may cause
damage to your health.
- In case of interference with other wireless 2.4 GHz devices,the interfer-
ing devices must be removed or switched off.
- Not intended for children under the age of 3 years.
- Contains small pieces. Danger of swallowing!
- Do not open the casing of the device.
- This device contains components that cannot be repaired by the user,
opening will void the warranty.
As with many other electrical devices, failure to take the following pre-
cautions can result in serious injury or death from electric shock, fire or
damage to the racing wheel.
If you use AC power, select an appropriate power source:
- Use only the power supply and AC power cord that came with your
racing wheel or that you received from an authorized repair center.
- Do not use non-standard power sources, such as generators or
inverters, even if the voltage and frequency appear acceptable. Only
use AC power provided by a standard wall outlet.
To avoid damaging the AC power cord:
- Protect the cord from being pinched or sharply bent, particularly
where it connects to the power outlet and the racing wheel.
- Do not jerk, knot, sharply bend, or otherwise abuse the power cord.
- Do not expose the power cord to sources of heat.
- When disconnecting the power cord or power supply, pull on the
plug - do not pull on the cord.
- If the power cord becomes damaged in any way, stop using it im
mediately and contact Fanatec Customer Support
Support for a replacement.
- Unplug your racing wheel’s power cord during storms or when
unused for long periods of time.
In combination with the Forza Motorsport CSR Elite wheel you can use
CSR Pedals, CSR Elite Pedals, Porsche Wheel Standard Pedals, Club-
Sport Pedals, or G25 / G27 pedals (optional adapter). Connect the pedals
with the RJ11 connector to the pedal connector on the backside of the
wheel. If you use the ClubSport Pedals or CSR Elite Pedals you can alter-
natively connect them directly to the PC as a separate USB controller.
5.4 Installation of pedals
IMPORTANT!
Use only one connection cable for the ClubSport or CSR Elite
Pedals at a time. The USB cable is for use with the PC only.
To Next Page
Loading...
Need help?
General
