Fancom 747 - 4.4 Index, Scale Keys, and Alarm Interface; Scale Key Selection

Fancom 747 4. Operation
9
4.4 Index, scale keys and alarm (C)
If there is more data of the same type, this key can be used to
jump to a higher or lower number.
Example :
On day 42 the weight of day 22 is required.
1. Press History weight.
2. Press .
3. Enter the number of days back from the current day (42-
22=20); press 2×, then 1×).
4. Press .
+
Instead of
, keys
and
can also be used to increase/ decrease
the number.
Scale keys
Use these keys to select the scale for which data is to be read out and/or
changed. A built-in light in the key will indicate which scale has been
selected. If data concerns all the scales connected, no light will illuminate.
This applies to keys thru and thru .
If there is an alarm situation, further information about the
alarm can be found under this key. Table 1 shows the meaning of
the values which can be set and read out at the alarm key.