Fancom 747 - 10. Password Security and Access; Changing the System Password; Using the System Password

Fancom 747 10. Password
38
10. Password
Function key System is always protected by a password. All settings
can be protected against unauthorized use by setting a password other
than the standard password. The password is a combination of maximum
five function keys. As long as the password is unchanged, this is key .
Changing the password
1. Press key System.
2. Enter the password and confirm using .
3. Press . The following text will appear on the display:
4. Press .
5. Enter the old password and press .
6. Enter the new password and press .
7. Enter the new password again and press .
The computer will only accept the new password after it has been entered
twice. Do not forget the new password; otherwise it will be impossible to
access the computer!
Using the password
If a new password has been entered (other than ) the computer will
request the password when a setting is changed. It will remember the
password for several minutes. The password does not have to be entered
for each change.
>>Configuration
New password
Time 13:23
Date Mo 31-05-99