Fancom 747 - 5. Scale Calibration Procedures; 5.1 Zero Point Calibration

Fancom 747 5. Calibrating scales
12
5. Calibrating scales
In order for the weighing computer to function properly, the scales must
be calibrated. In practice, the scales will generally be calibrated at the
beginning of a new flock cycle.
1. Determination of the zero
+
Ensure there is nothing on the scales.
1. Press Calibration scales.
2. Select the scale to be calibrated, e.g. Scale 1.
The following text will appear on the display:
3. Set Agreed? to YES. The computer will then automatically change
YES into NO again.
Setting zero:
Agreed? NO
Weight 0.000
>>