Fancom 747 - Uniformity Calculation Configuration; Offset Acceptation Weight Setting

Fancom 747 6. Settings
19
1. Press key Acceptation settings.
2. Press 4×. The following text will appear on the display:
Enter if the computer must calculate the uniformity over 10% or 15%.
This depends on how the integration is calculated.
Offset acceptation weight
1. Press key Acceptation settings.
2. Press 5×. The following text will appear on the display:
After changing the acceptation weight (parent stock and rearers), the
corrected amount appears as an offset value at Offs.Acc.Weight.
With parent stock the upper and lower limit of the acceptation weight of
males and females is protected against overlaps.
Offs.Acc.Weight 0
5×
Uniformity
calculation over 10
>>
4×