Fancom 747 - Page 29

Fancom 747 6. Settings
24
Entering a scale name
1. Select Scale description à 1. Scale description.
2. Enter the name of this scale at Scale name (see example 3 in section
4.3).
3. Repeat this for the other scales in this house.
Entering a growth standard number
1. Select Scale description à 1. Scale description.
2. At Growth std. select the growth standard applying to this scale.
Once these settings have been made, the settings can be made next time a
flock is setup at key Setup flock. The settings are made here per
house.
At installation, the installer has assigned the scales to a house. The
settings apply for all the scales in that house.