Need help?Do you have a question about the Fancom F71 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Manufacturer | Fancom |
| Model | F71 |
| Display | LCD |
| Connectivity | Ethernet |
| Operating Temperature | 0°C to 50°C |
| Humidity Range | 10-90% RH |
Details the different ways feed can be supplied: Dosing, Registration, and Dosing/Registration.
Explains how to define the amount of feed an animal receives daily throughout its lifecycle.
Explains how the control computer calculates daily feed amounts based on feed curves and animal data.
Describes how feed composition changes gradually from starter to finisher feed based on animal age.
Explains the concept of feeding cycles and how they are set up in time blocks.
Displays the main menu structure with various operational options for the Lumina 71.
Manages the feed process status, allowing interruption or continuation of operations.
Displays the feed curve data for a selected feed place, including weight and composition.
Configures animal setup for feed places, including number, curve, and weight.
Manages the dosing percentages for each feed place, including fixed and variable reductions.
Sets minimum stock levels for ingredients, triggering alarms when levels are low.
Configures alarms based on feed consumption percentage per feed place.
Sets alarms for external inputs, allowing monitoring of various system conditions.
Configures animal setup for feed places, including number, curve, and weight.
Details the specific feed curve data, including bending points and composition.
Explains how to handle loud and silent alarms and their statuses.
Describes system alarms and advises to contact the installer for troubleshooting.
To Next Page
