Lumina 71 Feed curve
36
12. Feed curve
Feed curves follow the animals' life cycle; they contain the feed composition and feed amount per animal. A feed
curve is created in table form. Per week enter the required feed amount and composition for days (bending points)
1, 7, 14, 21 etc. The control computer calculates the feed amount and composition on the days in between.
12.1 Overview
Feed curve tab page Overview
Curve
Readout of the number of the feed curve.
Description
Readout of the selected feed curve name.
12.2 Curve
Feed curve tab page Curve
Curve name
Readout of the selected feed curve name.
Bendpoint
Readout of the bendpoint from the feed curve.
Curve day
Setting the day on which the new feed composition becomes fully effective.
Always use Curve day
1 for the first bending point. Then use the preset feed
amount and composition from the first feeding day. In the subsequent days
the feed amount and composition gradually change until bending point 2 is
reached.
To Next Page
Loading...
