g
4.4 Adjusting the PREDEFINED position
Factory setting = 50%. If this is the proper position for you, you don't have to perform the following steps.
1. Set the air inlet with the manual operation switch to the position that should be assumed if mains power is
interrupted.
2. Press the pushbutton until the number 3 appears in the display and then release the pushbutton.
3. Press the pushbutton to confirm the setting. The letter P now appears in the display. This means that the
adjustment was successful.
4.5 Completing adjustments
After adjustment, set the operating switch to Automatic (A) so that normal functioning is possible.
To Next Page
Loading...
