: Controls light on/off button.
5. The receiver provides the following protective function:
Lock position: The DC motor has a built-in safety feature
against blade obstruction during operation. If something
obstructs the fan blades the motor will stop operating after
30 seconds of interruption. Please remove obstacles and
reset.
Over 80W protection: When the receiver detects motor
power consumption which is greater than 80W, the
receiver power will shutdown and fan operation will cease.
Disconnect the power supply and after 5 seconds return-
power on to the fan.
4. The remote buttons function as follows:
I = minimum speed II = low speed
III = medium low speed IV = medium speed
V = medium high speed VI = high speed
(Figure 4)
Fan speed:
: Turns the fan off.
: Controls fan direction - forward and reverse.
Figure 4
Maintenance
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Blade Cleaning
Periodic light dusting of the blades is recommended. Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
12
How to Operate Your Ceiling Fan (continued)
To Next Page
Loading...
Need help?
General
