DECT W710P (W710D+W610D) User Manual
Access the W710D webpage [Security]>>[Web Filter], adding and removing IP segments
are accessible. Configure the starting IP address within the start IP, end the IP address
within the end IP, and click [Add] to submit to take effect. A large network segment can be
set, or it can be divided into several network segments to add. If the user wants to delete,
select the network segment to be deleted from the Web Filter Table, and then click
[Delete] to take effect.
Enable Web Filter: configure enable/disable Web Filter; Click the [Apply] button to take
effect.
Enable web page filtering: configure to enable/disable web page access filtering; Click
the [Submit] button to take effect
Note:
If the device you are accessing is in the same network segment as the phone, please do
not configure the filter segment of the web page to be outside your own network segment,
otherwise you will not be able to log in the web page.
15.5 W710D Mutual Authentication
W710D supports mutual authentication both of HTTPS and SIP TLS.
Certificate Management
Device Certificate: Visit the W710D webpage [Security]>>[Device Certificate] and
set the device certificate parameters:
Device Certificate: Select the device certificate sent by the device for
authentication, and you can choose the default built-in certificate of the device; You
can also choose to customize the certificate and use the certificate uploaded by the
user.
Import Certificate: Upload a custom device certificate.
Certificate List: displays a list of uploaded custom device certificates, only one
To Next Page
