Fanvil V67 - Call Mute; Mute Microphone; Putting a Call on Hold; Hold and Retrieve Call

Call Mute
1．Press to Mute the microphone during the call.
2．Press again to un-mute the conversation.
Putting a call on hold
1
．
Press Hold soft key, caller is put on hold.
2．To retrieve the call press Resume soft key.
Note: with more than one active call, select desired call with the
navigator keys and use the corresponding soft key to hold or resume.
Call transfer
Attended transfer:
1．Press Transfer soft key during the active conversation, the call is
put on hold.
2．Dial the second telephone number.
3．When the call is answered, then press Transfer soft key to
complete the operation.
Blind transfer:
1．Press Transfer soft key during the active conversation, the call will
be on hold.
2．Then enter the 2nd telephone number and press Transfer soft key.
Call forward
1．Press Phone Settings icon > Line > Select the line > Forward
Settings.
2．Select the line, the type of forward, enter the destination number
and status, and press OK soft key.
Call conference
1
．
Once in line with 1st caller, press Conference key, 1st caller is put
on hold.
2．Then call the 2nd number.
3
．
After, 2nd call is established, press Conference key to set up the
conference.
Programmable keys
DSS keys:
1
．
You can use the phone web interface to configure the keys of the
screen.
2．You can press any keys which is blank or long-press the key that
configured, select a type and value, press icon.
Other keys:
1．You can configure shortcuts for the navigation keys and softkeys
on web UI.
2．You can press Phone setting icon > Key, select the Softkey
Screen you need, then select among the configurable items, and
select your desired type and value, press icon.
Do not disturb
1．Press DND icon when standby or click Phone Settings icon >
DND.
2
．
Select the Mode.
Voice message
1．To access your voice mailbox, press Voice message key or
Voice message icon , number of message be indicated if provided
by your server or pbx.
2．Select the line and press icon to call.
Bluetooth
1．Press Bluetooth icon in the status bar to open Bluetooth.
2
．
Press Settings icon > Bluetooth to enter the Bluetooth interface.
3．Afer opening, it displays the scanned Bluetooth list, select any
device, and click on the device pairing.
WiFi
1
．
Press WiFi icon in the status bar to open WiFi.
2．Press Settings icon > WiFi to enter the WiFi configuration
interface.
3
．
Afer opening, it displays the available WiFi list.
4．Select the WiFi you want to connect.
5．Enter the appropriate password to connect to the WiFi. The
default is DHCP mode.
Call list
1．Press Call Log icon .
2．Scroll the list using navigation key or slide the screen.
Phonebook
Access Phonebook:
1．Press Contacts icon.
2．Select All Contacts or other group.
3
．
To dial an entry, press Dial icon .
Add new entry:
1．Press Contact icon, Press All Contacts or other group > Press
Add icon.
2．Enter name and number and press OK icon .