To Next PageTo Next Page
Need help?Do you have a question about the Fanvil X6 and is the answer not in the manual?
General| Power over Ethernet (PoE) | Yes |
|---|---|
| Power consumption (typical) | 2 W |
| Mounting | Desk/Wall |
| Handset type | Wired handset |
| Product type | IP Phone |
| Product color | Black |
| Certification | CE, FCC 15 B, EN55022 B, EN61000-3-2, EN61000-3-3, EN55024, EN60950-1 |
| Speakerphone | - |
| Voice codecs | AMR, AMR-WB, G.711a, G.711u, G.722, G.723.1, G.726, G.729ab, iLBC |
| Lines quantity | 6 lines |
| Call log entries | 300 |
| Phonebook capacity | 1000 entries |
| Wi-Fi | No |
| Security algorithms | AES, MD5 |
| Networking standards | IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN interface type | Gigabit Ethernet |
| Supported network protocols | DHCP, PPPoE, L2TP, OpenVPN, SIP2.0 UDP/TCP/TLS, RTP/RTCP/SRTP, STUN, DHCP, PPPoE, 802.1x, L2TP, SNTP, FTP/TFTP, HTTP/HTTPS, TR069 |
| USB 2.0 ports quantity | 1 |
| Ethernet LAN (RJ-45) ports | 2 |
| Volume control | Digital |
| Keypad number of keys | 46 |
| Number of function keys | 8 |
| Display diagonal | 4.3 \ |
| Display resolution | 480 x 272 pixels |
| Cables included | RJ-9, LAN (RJ-45) |
| Number of handles included | 1 pc(s) |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 65 % |
| Dual-Tone Multi-Frequency (DTMF) modes | In-band, Out-of band, SIP info |
Weight and Dimensions| Package depth | 65 mm |
|---|---|
| Package width | 315 mm |
| Package height | 270 mm |
How to determine the specific Fanvil phone model for configuration.
Details on ensuring the correct firmware version is installed on the phone.
Requirement for a functional DHCP server for network configuration.
Specifies the required PBXware version for compatibility.
Instructions for connecting the phone using a power adapter.
Instructions for powering the phone via an Ethernet cable.
Method to locate the phone's IP address on the network.
Procedure for resetting the phone to its default factory configuration.
Configuration of User Agent Device settings within PBXware.
Process of creating a new extension in PBXware for the phone.
Manual registration method using phone's network address.
Configuration of User Agent Device settings for auto provisioning.
Process of creating extensions for auto-provisioned phones.
Steps for automatic phone registration using TFTP, HTTP, or HTTPS.
Settings within an extension to enable BLF functionality.
Specific phone settings required for BLF configuration.
