Preventive Maintenance
1. Manually activate CO
2
Solenoids to assist emptying barrels.
2. Deactivate all CO
2
Solenoids and depressurize barrels.
3. Perform visual inspections for leaks
4. Replace rear seals per PM recommendation, and repair DDV valve as needed.
5. Sanitize unit following recommended procedures.
6. Clean air filter.
7. Follow “Initial Start-Up and Freeze” procedure to start machine
54
• Recommended replacement time: 6 months
• Approximate PM time for 564: 1.5 hours
• PM Parts Needed
•Rear Seals
•Dow 111 lubricant
To Next Page
Loading...
