Need help?Do you have a question about the FBR FGP 50/2 EVO-2 and is the answer not in the manual?
Detailed technical specifications including flow, power, voltage, and dimensions for the FGP 50/2 EVO-2 burner.
Graphical representation of burner operating pressure versus thermal power output.
Physical dimensions of the burner, presented in a table with labeled parts for installation planning.
Visual guide and legend for correctly installing the burner onto a generator unit.
Explanation of indicator lights, buttons, and their functions for diagnostics and operation.
Essential safety precautions and warnings to be followed before installation and maintenance.
Steps for checking supply, transport, packaging, and storage conditions before installation.
Guidance on verifying the burner's data plate against boiler specifications for compatibility.
Illustrations showing acceptable installation orientations for optimal burner performance.
Details on suggested connection dimensions between the burner and the generator's boiler plate.
Guidelines for selecting the appropriate flame tube length based on boiler specifications.
Diagram illustrating the light-oil flow and components within the burner's hydraulic system.
Reference to separate instructions for understanding the electrical panel layout.
Reference to an external handbook for the electrical device's working diagram.
General security norms and essential checks required before starting and calibrating the burner.
Diagram and legend for the pump calibration process, highlighting key components and settings.
Table detailing recommended settings for nozzles, pressure, flow, and air openings for calibration.
Step-by-step procedure with diagrams for safely removing the combustion head without dismounting the burner.
Detailed illustrations and measurements for correctly positioning the ignition and flame electrodes.
Table listing common irregularities, their probable causes, and recommended remedies for burner faults.
To Next Page
General
