FCI ST100 series Operation Manual

ST100 Series HART
Fluid Components International LLC 15
HART COMM NUMB. HART COMMAND DESCRIPTION HART DATA TYPE & SIZE
48
STANDARIZED STATUS 3
1 BYTE
ANALOG CHAN FIXED
1 BYTE
DEVICE SPECIFIC STATUS
11 BYTES
50
READ DYNAMIC VARIABLE ASSIGNMENTS
PRIMARY DEVICE VARIABLE 1 BYTE
SECONDARY DEVICE VARIABLE N/A
TERTIARY DEVICE VARIABLE N/A
QUATERNARY DEVICE VARIABLE N/A
51
WRITE DYNAMIC VARIABLE ASSIGNMENTS 1 BYTE
PRIMARY DEVICE VARIABLE 1 BYTE
SECONDARY DEVICE VARIABLE N/A
TERTIARY DEVICE VARIABLE N/A
QUATERNARY DEVICE VARIABLE N/A
ST100 HART Device Specific Commands
The ST100 HART supports 20 Device Specific commands.
HART COMM NUMB. HART COMMAND DESCRIPTION HART DATA TYPE & SIZE
137
READ TOTALIZER VALUE
READ TOTALIZER
FLOAT (4BYTES)
138
READ TOTALIZER STATE
READ TOT STATE
UNSIGNED-8
139
WRITE TOTALIZER STATE
READ TOT STATE
UNSIGNED-8
140
READ DEVICE INFORMATION
DEVICE CO DEVICE CO
ASCII BITSTRING (10 BYTES)
DEVICE SERIAL NUMBER DEVICE S/N
ASCII BITSTRING (10 BYTES)
DEVICE SOFTWARE VER DEV SOFTW VER
ASCII BITSTRING (4 BYTE)
159
WRITE FACTORY RESTORE FACT_RESTORE
ENUM (1 BYTE)

FCI ST100 series Specifications

General

Brand	FCI
Model	ST100 series
Category	Measuring Instruments
Language	English