This page is subject to proprietary rights statement on last page
27 Doc. No. 06EN003367 Rev. E
ST50 Mass Flow Meter Fluid Components International LLC
Note: When invoking a Write Function, separate the Command characters and the data value with a space. All Read and
Write Functions are completed with a <CR>. To exit CLI, press <CR> following the last Command <CR>.
Examples: RBK<CR> (Read Breakpoint)
WBK 2222<CR> (Write Breakpoint 2222)
RC11<CR> (Read Coefficient C1,1)
WC11 –234.567<CR> (Write Coefficient C1,1, -234.567)
<CR> (Leave Command Line Mode)
To Next Page
Loading...
