PROGRAMMING WITH THE KEYPAD
IN VFO MODE
Switch the transceiver ON, then press [ VFO ] key to select
either MR
(Memory Mode) or VFO (Frequency Mode).
• Note:
To key in a specific frequency or program a
memory channel you must be in VFO mode.
Function keys:
1. Squelch
Press [ F ]+[1 ] key sequence to display squelch level, the
factory default level is 5. Use [
◄] + [►] keys to adjust the
squelch level (0-9).
•
The squelch function is designed to block out background
noise when no transmission is being received.
11
2. HI / LO Power Level
Press [F] + [2] key sequence to display current power output
setting, use [
◄] / [►] keys to select power level desired. Press
PTT switch to accept any change and exit.
To Next Page
Loading...
