MEMORY CHANNELS
In MR mode you use programmed memory channels,
eliminating the need setup each time. You can store
frequencies and settings in up to 99 different memory channels
on this transceiver.
1. Programming a memory channel
In the VFO mode Select desired frequency and settings you
require, then press the [F] + [VFO] key sequence. The LCD
displays "SAVE--?". Use the [◄] / [►] keys, or key in the
desired value, to navigate to the desired memory channel.
Press PTT switch to store the settings and exit.
2. Selecting a memory channel
Select the MR mode using the [F] key, then
use the [◄] / [►] keys
scroll to, or key in the desired
two digit value of, the channel you
wish to use.
18
To Next Page
Loading...