FEC PP-9635 - Setup Cash Drawer

38
How to Setup the Cash Drawer
Read First:
 Please make sure the voltage and cable pin assignment of your cash drawer matches the cash
drawer port on PP-9635.
 You may find the jumper setting and pin definition in M/B J1900 user manual.
 Please refer to trouble shooting if the cash drawer cannot be detected by PP-9635
To open drawer 1 (default):
port[openaddr] <= open1
wait(sleep(ms))
port[openaddr] <= close
To open drawer 2:
port[openaddr] <= open2
wait(sleep(ms))
port[openaddr] <= close
To get status:
StatusValue <= port[status] and statusmask
The parameters, which are in the cashdrawer.ini
openaddr=a04
status=a05
sleep=200
open1=40
open2=80
close=00
statusmask=01