Why does my FEC PP-9635 Touch Panel power on but not boot?
If the FEC Touch Panel powers on but there is no LED light, it might be an issue with the M/B. If there is a light, ensure the adapter is working properly by reconnecting the AC cord.
What to do if my FEC PP-9635 Touch Panel has no display?
If your FEC Touch Panel has no display, check if the LVDS cable is properly connected. If the issue persists, contact the FEC service center to replace the LCD module.
What to do if my FEC Touch Panel automatically reboots?
If your FEC Touch Panel automatically reboots, make sure the RAM is firmly seated; if not, replace it. Also, perform an HDD virus scan or re-image with a known clean source. If the issue persists, consider replacing the MB or contacting the FEC Service Center.
What causes a FEC Touch Panel to shut down during operation?
If your FEC Touch Panel shuts down during operation, try replacing the AC outlet or the adapter. If the problem continues, the MB may need to be replaced.
How to fix a FEC PP-9635 that won't enter OS?
To fix a FEC Touch Panel that won't enter the OS, reimage the system or install another working HDD to test again.
What to do if FEC PP-9635 Touch Panel system keeps beeping while powering on?
If your FEC Touch Panel system keeps beeping while powering on, check that the RAM is seated firmly and that the RAM module is the correct specification. If problems persist, consider replacing the MB or contacting FEC Service Center.
What to do if my FEC PP-9635 shows a black screen after powering on?
If your FEC Touch Panel shows a black screen after powering on, connect an external monitor to check if it displays correctly; if it does, replace the LED panel. Alternatively, replace the HDD, clear the CMOS and load factory BIOS defaults, replace the CMOS battery, check that the RAM is seated firmly, or replace the MB.
How to resolve 'no power on BOOT FAIL' on FEC PP-9635?
If your FEC Touch Panel shows 'no power on BOOT FAIL', check if the M/B is connected well after re-installing. If the problem persists, try replacing the RAM.
What to do if my FEC Touch Panel can't detect HDD?
If your FEC Touch Panel can't detect the HDD, ensure the HDD is properly connected after re-installing. If not, replace it.
Why does my FEC PP-9635 display a vertical line or white screen?
If your FEC Touch Panel displays a vertical line or shows a white screen, check if the LCD Panel PIN assignment is properly connected and ensure the LVDS cable is not loose. If the signal cable is loose, contact the FEC service center to replace the LCD module.
General| Brand | FEC |
|---|---|
| Model | PP-9635 |
| Category | Touch Panel |
| Language | English |
Contact information and website for technical assistance and downloads.
Guidelines for safe operation, handling, and environmental conditions.
Step-by-step instructions for unboxing the product and its accessories.
Details about input/output ports and optional device connections.
Step-by-step guide for installing Windows 10 Enterprise on the system.
Recommended order for installing system drivers and utilities.
Detailed guide for installing ELO Touch Tools and calibration.
Steps for installing EETI Touch Kit drivers for different touch types.
Step-by-step instructions for attaching the stand to the unit.
Procedure for removing and installing a storage device.
Detailed steps for safely removing the motherboard from the system.
Essential safety and handling precautions before installing the motherboard.
Step-by-step instructions for updating the system's BIOS version.
Troubleshooting steps for display problems like no display or white screen.
Solutions for power-related problems like no boot or shut down.
Steps to resolve issues where the HDD is not detected.
To Next Page