FEC PP-9635 - System Power Issues

85
Category
Symptom
Factor
Part Number
Check Point
System
Power on but
no boot
1. No LED light
2. Power on and LED
light on
RD9000PH01BG
(90W Adapter
12V 4Pin)
1. Make sure if power on but no
LED light, it should be M/B
issue
2. Can the adaptor work
probably after reconnecting
the AC cord
3. Please contact FEC service
center
System
Power Shut
down during
operation
1. Replace AC outlet
2. Replace Adaptor
3. Replace MB
System
No power on
BOOT FAIL
1. M/B is defective
2. RAM is defective
RH9000MB1141
FH-J190M/B
BT-I(E3826)1.467G
M/B:1.2 BIOS:F1
1. Check if M/B is connected
well after re-installing
2. Replacing new RAM
3. Please contact FEC service
center