PP SERIES | PP-9745W – User Guide
48 FEC ITALIA
Cash Drawer
Only on PP Series
• Please make sure the voltage and cable pin assignment of your
cash drawer matches the cash drawer port on PP-9735W.
• You may find the jumper setting and pin definition in M/B J1900
user manual.
• Please refer to trouble shooting if the cash drawer cannot be
detected by PP-9745W
Open drawer 1 (default):
port[openaddr] <= open1
wait(sleep(ms))
port[openaddr] <= close
Open drawer 2
port[openaddr] <= open2
wait(sleep(ms))
port[openaddr] <= close
Stato:
StatusValue <= port[status] and statusmask
Parameters inside cashdrawer.ini file
openaddr=a04
status=a05
sleep=200
open1=40
open2=80
close=00
statusmask=01
To Next Page
Loading...
