Before Getting Started
BEFORE STARTING YOUR UNIT
• Read the instruction manual before operating the unit
for the first time. It contains important information on
operation, safety, maintenance, service and warranty.
• Keep this instruction manual for future reference.
• Do not start a damaged unit.
•The assembly and connection of the unit must be
carried out according to the instructions. If they are
not followed you run the risk of voiding the warranty.
Important information
1. The power cord is located in the rear of the unit.
2. Do not allow contact between the unit and water.
3. Do not cover the air discharge and air intake louvers
of the unit.
4. Proper venting of the air to the exterior is required
at all times.
The unit hascasters to ease movement. If it is necessaryto
tilt the unit, it must first be emptied of water in the internal
tank using the drain valve at the bottom of the unit. (See
the sectionWhen transporting the unit or Storing the unit
for the season.)
E] Description of Parts on the Portable Cooling Unit
Filter Nozzle
Drain Hose
Upper Drain Valve
Bracket to Store
Exhaust Tube
Serial Plate
Exhaust Tube
Air Intake Louvers
Power Cord
Lower Drain Valve
To Next Page
Loading...
