Fein BOP 6 - Page 23

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
6. Removal
C-SC_CSSM
Version 1.0
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 23 of 65
Removing the gearbox housing [applies to: BOP 13-2 (A)]
1. Pull off the grooved ball bearing (1).
2. Press down on the gear-wheel (2).
Tools:
- Drawing-off socket cap
- Chuck cone, 15 mm
- Arbor press
- Sleeve:
12 mm inner diameter
26 mm outer diameter
1
2