Fein BOP 6 - Page 53

BOP 6 (A); BOP 10 (A); BOP 10-2 (A); BOP 13-2 (A)
7. Fitting
C-SC_CSSM
Version 1.0
2017-10-12
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Page 53 of 65
Fitting the gearbox housing [applies to: BOP 13-2 (A)]
3. Press on the gear wheel (1).
4. Press in the grooved ball bearing (2).
Tools:
- Arbor press
- Sleeve
12 mm inner diameter
30 mm outer diameter
1
2