26
www.feiyu-tech.com
5.2.2 AK series brushless follow focus (AKFII)
(1) Fix the lens gear to the camera's focus ring position.
(2) Fasten the fixed bracket to the quick release plate of the gimbal with a hexagonal
screw, and insert the aluminum tube.
(3) Insert the follower into the aluminum tube, lock the fixed thumb screw on the
follower, move the aluminum tube to adjust the front and rear position so as to
make the follower gear and the lens gear engage, and lock the fixed thumb screw
on the fixed bracket.
(4) Insert the data cable into the USB port of the fixed plate of AK series gimbal,
and the installation is completed.
For more instructions, please check
AKF2 AK series brushless follow focus manual.
To Next Page
Loading...
