- 4 -
Attach with quick release plate only Attach with camera backing base and quick
release plate
3.2 Install lens holder (Optional)
Install the lens holder on the quick release plate if needed, the rubber of the lens
holder must be directly under the lens. It is recommended to use the lens holder
when using a long or heavy lens.
3.3 Mount camera on gimbal
Unlock ① , slide ② into the slot, lock ① , loosen ③ , slide ④ into the slot as
indicated, adjust the camera forward and backward until roughly balanced, then
tighten ③ .
To Next Page
Loading...
