FELIXprinters Felix Pro 1 - 6 Unboxing; Contents of Box

Page | 7
User Manual – FELIX Pro 1
Rev 3
www.FELIXprinters.com
support@FELIXprinters.com
6 UNBOXING
This chapter will guide you to setup your printer.
6.1 Contents of box
Check if all the accessories are in the box. The box could contain extra parts like filament you have
ordered.
Item
Amount
Item
Amount
Felix Pro 1
1
Filament holder
2
Foot bracket
1
Filament Guide
1
Heated Bed
1
Teflon tubes
2
Display Unit
1
M4x20 bolts
2
Tweezers
1
Allen key
1
Power supply
1
Power cable EU/US/AU/GB
1
Quick start Manual
1
microSD Card + Reader
1
FELIXbuilder License Voucher
1
USB cable
1
Optional: Filament Roll
1
Next to the provided set we recommend the following tools: small pliers, scissors, (plastic) spatula,
detergent like methylated spirit or denatured alcohol, paper towel or cloth.