To Next PageTo Next Page
Need help?Do you have a question about the Fella TS 880 PRO and is the answer not in the manual?
Machine specifications including weight, dimensions, power requirements, and PTO speed.
Connect machine to tractor links and adapt PTO shaft for operation.
Connect hydraulic group, traction cables, and illumination to the tractor.
Fold guards, remove tine arms, and secure rotors for safe transport.
Remove prong covers, adjust tine arms, and deploy hydraulic system for operation.
Set swath width, frame, and engage PTO shaft for operation.
Set operating height, swath tool level, and reaping control cam.
Adjust longitudinal and traverse inclination of rotors for optimal performance.
Adjust the speed of rotor lifting and lowering via hydraulic valves.
Switch off PTO, fold guards, remove tine arms, and secure prong covers.
Ensure safety locking device is engaged for transport position before travelling.
Ensure stability, park on firm surface, and secure against rolling.
Disconnect PTO shaft, hydraulic hoses, and lower links before parking.
Stop engine, remove key; check screws, nuts, and supports before service.
Maintain tires and PTO shaft, checking pressure and following manufacturer's instructions.
Handle hydraulic system with care, aware of high pressure and fluid hazards.
Options include wide-angle transmission shaft and individual lifting devices for rotors.
Spare wheel and quantity divider for lifting device are available as special equipment.
Adhere to country-specific traffic laws, load limits, licenses, and dimensions.
Ensure functional lighting, warning plates, and observe speed limits.
General| Brand | Fella |
|---|---|
| Model | TS 880 PRO |
| Category | Farm Equipment |
| Language | English |
