How to fix Fellowes L125 A4 when pouch does not completely seal the item?
If your Fellowes Laminator pouch doesn't completely seal the item, the item may be too thick to laminate. The maximum document thickness should be .40mm.
Why the ready lamp (green) and the Power LED (red) of Fellowes L125 A4 Laminator have turned off?
If the ready lamp (green) and the Power LED (red) have turned off on your Fellowes Laminator, the laminator is in Auto Shut Off mode. Press the ON/OFF switch to reset the machine.
How to fix Fellowes L125 A4 with no ‘power on’ lamp (red LED)?
If the ‘power on’ lamp (red LED) is not illuminated on your Fellowes Laminator, the machine may not be switched on. Ensure the machine is switched on at the side and at the wall socket.
What to do if Fellowes L125 A4 pouch is lost in the machine?
If a Fellowes Laminator pouch gets stuck, it might be jammed. To resolve this, press the release lever and gently pull the item out by hand.
Why does my Fellowes Laminator pouch have waves or bubbles?
If your Fellowes Laminator pouch has waves or bubbles after laminating, the pouch thickness might be incorrect. This laminator is designed to work with 75 - 125 micron pouches.
What to do if Fellowes Laminator pouch is damaged after lamination?
If your Fellowes Laminator pouch is damaged after lamination, it could be due to damaged rollers or adhesive on the rollers. Try passing cleaning sheets through the machine to test and clean the rollers.
What to do if the Power LED is flashing red and the Ready LED (green) has turned off on Fellowes L125 A4?
If the Power LED is flashing red and the Ready LED (green) has turned off on your Fellowes Laminator, the laminator has gone into Auto Shut Off mode. Press the ON/OFF switch, and the machine will reset itself.
Why no ‘ready’ lamp after a long period (green LED) on Fellowes L125 A4 Laminator?
If the ‘ready’ lamp (green LED) on your Fellowes Laminator does not turn on after a long period, the machine might be in a hot or humid area. Move the machine to a cooler and dry area.
Controls the power state of the laminator.
Used to eject jammed or misaligned pouches.
Check machine and wall socket power connections.
Ensure machine is not in a hot or humid area.
Press ON/OFF switch to reset the machine.
Verify document thickness does not exceed limits.
Check pouch thickness compatibility.
Use release lever and ensure correct pouch insertion.
General| Type | Hot laminator |
|---|---|
| Product color | White |
| Auto power off | Yes |
| Preheating time | 4 min |
| Built-in display | No |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Lamination speed | - mm/min |
| Number of rollers | 2 |
| Maximum lamination width | - mm |
| Pouch capacity (per flap) | 125 µ |
| Maximum document thickness | 0.125 mm |
Weight and Dimensions| Depth | 158.8 mm |
|---|---|
| Width | 355.6 mm |
| Height | 66.7 mm |
| Package depth | 185.7 mm |
| Package width | 374.7 mm |
| Package height | 90.5 mm |
| Package weight | 16800 g |
To Next Page
