To Next PageTo Next PageWhy is the 'ready' lamp not turning on after a long time on my Fellowes Callisto A4?
If the green 'ready' lamp on your Fellowes Laminator doesn't light up after a while, the machine may be in a hot or humid area. Move it to a cooler, drier location.
How to fix Fellowes Callisto A4 Laminator when the power on lamp is not working?
If the red 'power on' lamp isn't lit on your Fellowes Laminator, the machine might not be switched on. Check that the machine is switched on both at the front and at the wall socket.
What to do if the Fellowes Callisto A4 Laminator pouch is lost in the machine?
If a pouch gets stuck inside your Fellowes Laminator, it likely means the pouch is jammed. To resolve this, use the release lever and gently pull the item out by hand.
How to fix a Fellowes Laminator that doesn't completely seal the item?
If your Fellowes Laminator pouch isn't sealing completely, it could be due to a few reasons. First, the item you're trying to laminate might be too thick; ensure the pass-through thickness is correctly selected, and try again. Alternatively, the temperature setting may be incorrect. Make sure the pouch thickness is correctly selected before running it through again.
What to do if the Fellowes Callisto A4 Laminator pouch has waves or bubbles?
If your Fellowes Laminator pouch comes out with waves or bubbles, the temperature setting might be incorrect. Verify that the pouch thickness is correctly selected and pass it through the laminator again.
How to fix Fellowes Callisto A4 Laminator if pouch is lost in the machine?
If a pouch gets stuck inside your Fellowes Laminator, it means the pouch is jammed. Press the reverse button and gently pull the item out by hand.
What to do if Fellowes Callisto A4 pouch does not completely seal the item?
If your Fellowes Laminator pouch isn't sealing the item completely, it might be too thick to laminate. Check that the pass-through thickness is correctly selected, and then pass it through the laminator again.
What to do if Fellowes Callisto A4 Laminator pouch is damaged after lamination?
If the Fellowes Laminator pouch is damaged after lamination, the rollers may be damaged, or there may be adhesive on them. To test and clean the rollers, pass cleaning sheets through the machine.
Why does my Fellowes Callisto A4 Laminator pouch have waves or bubbles?
If your laminated pouch has waves or bubbles, it might be due to an incorrect temperature setting. Check that the pouch thickness is correctly selected and try running it through the Fellowes Laminator again.
Why is the stand-by icon flashing on my Fellowes Callisto A4?
If the stand-by icon is flashing on your Fellowes Laminator, it indicates the machine is in ‘Power Save’ mode. Press the ‘Stand-by’ button, and then select your preferred setting.
Details the function of each control button and indicator on the laminator.
Lists format, thickness, speed, warm-up, and cool-down times.
Provides voltage, wattage, dimensions, and weight of the unit.
Explains 'Safe Start', 'Reverse', and 'Hot Swap' functions.
Offers advice for optimal results and proper pouch usage.
Details the 2-year warranty, terms, conditions, and remedies.
Information on the proper disposal of electrical and electronic equipment.
Lists directives and standards the product adheres to.
Provides key phone numbers for customer service and regional support.
General