TROUBLESHOOTING
WARRANTY
Problem
Cause
Solution
Need Help?
LAMINATION STEPS
1
BEFORE YOU LAMINATE
2 3 4
Use Fellowes®
brand pouches
for best results.
Select correct pouch
size for laminated
item.
Plug laminator into
power outlet.
Position laminator
so you have enough space to
allow items to pass freely
through the machine.
Slide power button to
right and wait for green
Ready Light.
Place item inside pouch
against the sealed edge.
To prevent jamming, use
a carrier when item is
smaller than the pouch.
Place pouch, sealed edge
rst, into laminator entry.
Keep pouch straight and
use the edge guide to
center it.
To prevent jamming, immediately
remove laminated item from
back of machine. Let item cool
on at surface for several seconds.
3
To Next Page
Loading...
