3
CAPABILITIES
- Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
DO ensure self-adhesive pouches are only used with the cold setting.
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc) on
hot settings.
DO NOT laminate with self-adhesive pouches on hot settings.
DO NOT laminate an empty pouch.
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
FEATURES & TIPS
Performance Technical Data
Format A3 Voltage / Frequency / Current(Amps) 220-240V AC, 50/60Hz, 5A
Entry width 320mm Wattage 1000 Watts
Pouch thickness (min) 75 microns Dimensions (HxWxD) 58 x 30 x 14 cm
Pouch thickness (max) 250 microns Net weight 15 kg
Estimated heat-up time 3 minutes Laminating capacity Max document thickness = 2mm (0.08”)
Cool down time 30-60 minutes Min pouch = 75 micron
Lamination speed Variable speed (0-95 cm/min) Max pouch = 250 micron
Number of rollers 6
Ready indication Light
Reverse function Yes
Soft touch buttons + beep Yes
LED interface Yes
Photo capable Yes
Carrier-free Yes
External cooling plate Yes
Auto Shut Off
If temperature is selected and then machine is inactive for 30 minutes,
the Auto Shut off function will place the machine into standby mode.
The heat will turn off and machine will power down. The machine will
beep and green ready light will flash. To operate the machine press any
button or cycle the power switch.
t Always put item into the appropriate sized pouch.
t Always test laminate with a similar size and thickness before final
process.
t If required, trim excess material from around the item after lamina-
tion and cooling.
t For best results, use Fellowes ® brand pouches.
t When working with different pouch thickness’ (temperature settings)
it is recommended to start first with the thinnest pouches.
t Prepare pouch and item for lamination. Place item within pouch
centred and touching the leading sealed edge. Ensure the pouch is
not too large for the item.
ENGLISH
E
To Next Page
Loading...
Need help?
General