3
Product Pr o f i l e
The SPL A4, the SPL A3 and the SPL A2 are
h e a v y -d u t y
laminators designed for daily office or
commercial use. In addition to processing stan-
dard pouches of every thickness, SPL laminators
take standard mounting boards for durable point-
of-sale displays. To give professional users the
precision they need, all SPL models also offer degree-by-degree temperature adjustment
and nine speed options on easy-to-read digital displays.
Here is an overview of SPL laminator capacity, capabilities and special features:
OV E R V I E W SPL A4 SPL A3 SPL A2
C a p a c i t y
– Pouch width: Max.
DIN size A4 A3 A2
centimeters (document) 26 33 45
inches 10-3/16 13 17-11/16
– Pouch thickness: Min.-Max.
microns 80-250 80-250 80-250
mils 3-10 3-10 3-10
– Paper thickness: Max.
gr 300 300 300
lbs 80 80 80
–Entry width
millimeters 3.5 3.5 3.5
inches 1/8 1/8 1/8
Warm-up time
in minutes :
90° C / 194° F (lowest) 3 3 3
140° C / 284° F (highest) 8 8 8
Processing speed
in cm/inch per min.
Speed 1 (lowest) 29/11 29/11 29/11
Speed 9 (highest) 90/35 90/35 90/35
Reverse mode
✔ ✔ ✔
Automatic standby mode
✔ ✔ ✔
Because SPL laminators are designed to take mounting board, the entry is wide enough to
accommodate pouches containing paper much thicker than the 300 gram (80 lbs) maxi-
mum recommended above. While
filling the pouch to the limits
of the entry will not dam-
age your machine, you may not be satisfied with the quality of the results.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
As with any electrical equipment:
• Keep it away from heat or water sources
• Plug it in near an easily accessible outlet
• Do not use it if damaged in any way
• Do not attempt to open or otherwise repair it
• Turn it off after each use, and
• Unplug it when not in use for an extended period.
To Next Page
Loading...
Need help?
General