3
English
Product Profile
The SPL A4, the SPL A3 and the SPL A2 are
heavy-
duty
laminators designed for daily office or com-
mercial use. In addition to processing standard
pouches of every thickness, SPL laminators take
standard mounting boards for durable point-of-sale
displays. To give professional users the precision
they need, all SPL models also offer degree-by-degree temperature adjustment and nine
speed options on easy-to-read digital displays.
Here is an overview of SPL laminator capacity, capabilities and special features:
OVERVIEW SPL A4 SPL A3 SPL A2
Capacity
–Pouch width: Max.
DIN size A4 A3 A2
centimeters (document) 26 33 45
inches 10-3/16 13 17-11/16
–Pouch thickness: Min.-Max.
microns 80-250 80-250 80-250
mils 3-10 3-10 3-10
–Paper thickness: Max.
gr 300 300 300
lbs 80 80 80
–Entry width
millimeters 3.5 3.5 3.5
inches 1/8 1/8 1/8
Warm-up time
in minutes :
90° C / 194° F (lowest) 3 3 3
140° C / 284° F (highest) 8 8 8
Processing speed
in cm/inch per min.
Speed 1 (lowest) 29/11 29/11 29/11
Speed 9 (highest) 90/35 90/35 90/35
Reverse mode
✔✔✔
Automatic standby mode
✔✔✔
Because SPL laminators are designed to take mounting board, the entry is wide enough to
accommodate pouches containing paper much thicker than the 300 gram (80 lbs) maximum
recommended above. While
filling the pouch to the limits
of the entry will not damage
your machine, you may not be satisfied with the quality of the results.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
As with any electrical equipment:
• Keep it away from heat or water sources
• Plug it in near an easily accessible outlet
• Do not use it if damaged in any way
• Do not attempt to open or otherwise repair it
• Turn it off after each use, and
• Unplug it when not in use for an extended period.
To Next Page
Loading...
Need help?
General