Ferlux FLORA 7 - CLEANING THE ASH DRAWER; CLEANING THE HEAT EXCHANGER

37
With an ash vacuum cleaner, remove the ashes that have accumulated in the chamber and inside the brazier holder.
8.2 CLEANING THE ASH DRAWER
The ash collection drawer surrounds the brazier holder, which must be regularly emptied to prevent it overowing with
ashes.
The ashes must be placed in a metal container with a sealed lid until the ashes are wholly and completely extinguished.
The closed contained must be placed on a non-ammable base or the ground and well away from ammable materials.
Once the ash drawer has been emptied, put it back in its position.
8.3 CLEANING THE HEAT EXCHANGER
This is a simple task that does not require any special tools but it does ensure that your heater has an e󰀨ective heat
exchanger for the heat from the unit with the air in the room.
The work must be carried out when the heater is coold and it may be convenient to do so before each lighting or at least
on a daily basis.
To carry out the cleaning, pull the rod forwards and backwards, which makes a grate move that cleans the heat exchanger,
removing any residues from combustion and thus ensuring peak performance.