FERNO/MAN/01/18/159/UK 11 Pegasus Trolley
Using the Restraints (Pegasus MK2)
9. The patient should be secured using the harness and both single strap restraints.
10. Dispose of and replace any restraints that are worn, damaged or have been
involved in any accident – they may have hidden damage.
11. Unbuckle all restraints and lay the straps out of the way before transferring the
patient.
12. Transfer the patient onto the trolley using recognised techniques.
13. To secure the 4 point harness, slide the two buckles on the shoulder straps onto
the buckle on the right hand side strap and then clip left hand side to the right
hand side buckle. Adjust the shoulder straps so they are snug against the patient’s
shoulders and adjust left and right hand side straps so they are snug against the
patients sides.
14. Fasten the two leg restraints and adjust to ensure patient comfort.
15. To release the harness, press release button.
NOTE:
To remove the four-point harness, unclip two side brackets and un-loop the
shoulder straps from the cross bar at the top of the X Frame.
To Next Page
Loading...
