FERNO/MAN/01/18/159/UK 10 Pegasus Trolley
Using the Restraints (Pegasus Trolley)
1. The patient should be secured using the harness and both single strap restraints.
2. Dispose of and replace any restraints that are worn, damaged or have been
involved in any accident – they may have hidden damage.
3. Unbuckle all restraints and lay the straps out of the way before transferring the
patient.
4. Transfer the patient onto the trolley using recognised techniques.
5. Buckle the harness by inserting all three tangs into the buckle until they lock in
place. Adjust the shoulder straps so they are snug against the patient’s shoulders.
6. Fasten the one-piece restraint across the patient’s chest and under the arms.
7. Fasten the two leg restraints and adjust to ensure patient comfort.
8. To release the harness, twist the buckle lever.
NOTE
To remove the four-point harness, unclip all four brackets from mounting pegs
positioned on the trolley frame.
To Next Page
Loading...
