Ferno Pegasus - Cleaning and Lubrication; Cleaning Procedure; Lubrication Guidelines

FERNO/MAN/01/18/159/UK 16 Pegasus Trolley
Leg Rest Features
The following features must be executed with the operator positioned at the
foot end of the trolley.
Trendelenberg Position
To raise the leg rest to the Trendelenberg position, grip and support the leg rest
frame at the foot end. Lift the leg rest until the support bar locks into position.
Maintain a grip on the frame and gradually reduce support of the leg rest until you
are confident that the support bar has locked.
To lower the leg rest from the Trendelenberg position, hold the leg rest frame at both
sides at the foot end. Slide hands forward until fingers contact the support bar on
the underside of the leg rest frame. At this point, simultaneously lift and move the
support bar forward, thus releasing it from its locked position and slowly lower the leg
rest frame to its resting position.
Knee Contour (Fowler) Position (when fitted)
To raise the knee contour position, hold both lifting straps (yellow) and lift up.
Gradually release the lifting straps, ensuring that the support bar has locked in
position.
To lower the knee contour position, hold both release straps (red), lift up and pull
straps in the direction of the foot end and slowly lower the frame to its resting
position.
NOTE:
Potential pinch point - care should be taken during operation
NOTE:
Potential pinch point - care should be taken during operation