FERREX CSP5300 - Page 47

Bedienung
45
• The saw cut is not straight.
• The vibration increases.
• Fuel consumption increases.
m NOTE
We recommend that a professional sharpen the chain.
Instructions for sharpening a saw chain:
Chainsaw
type
File
diameter
Upper angle lower angle
Upper tilt
angle
(55 °)
Standard
depth
Chucking
rotation
angle
Chucking
inclination
angle
side angle
21PBX
approx. 4,8
mm
30° 10° 85° 0,64 mm
depth stop file
Maintenance, Servicing