15
3.6 Driver protection
- In order to protect the operator from possible flying debris, it is recommended to fit
two protection grills (1) to the operator’s cab, so that the debris thrown by the
machine cannot reach the glass of the cab and break it causing injuries to the
operator (FIG. 11)
FIG. 11
- It is recommended to fit 5 mm sheets of polycarbonate (2) between the grills (1)
and the glass. They will prevent small stones and fragments from hitting the glass
of the cab. (FIG. 11)
- Attach the flail hedge mower only to tractors with type approved anti-roll
over driving cab (ROPS).
- The operator and all personnel must wear a safety helmet and eye protectors as
protection against possible flying material.
3.7 Danger
- Pay special attention when working under or near electric lines, an electric arc can
be released. (FIG. 12)
FIG. 12
To Next Page
Loading...
