Ferris HydroCut HC32KAV13 - Page 21

PART NO. DESCRIPTIONREF NO. QTY.
Motion Control, Parking Brake & Operator Presence Group - Manual Start
Footnotes
1 49175 1 OPERATOR PRESENCE HANDLE - RH
2 21490 2 GRIP, Vinyl
3 25034 2 NUT, 3/8-16 Hex
4 43417 2 HEX ADJUSTER
5 45943 2 SHOULDER SPACER
6 47723 1 SWITCH ROD
7 48327 1 BRAKE ROD
8 20047 3 COLLAR, 5/16" Set
9 42614 2 THUMB CONTROL LEVER, Complete (Includes Ref No. 10 - S/N: 210 & below)
10 25510 2 FOAM GRIP
11 42542 1 PIVOT CONTROL - RH (S/N: 210 & below)
12 25213-8 7 CLEVIS PIN, 5/16 x 1
13 20979 8 CLEVIS, 5/16-24, Plastic
14 25201-6 8 COTTER PIN, 3/32" x 3/4"
15 25033 8 NUT, 5/16-24 Hex
16 47642 2 THUMB CONTROL ROD
17 25100 2 NUT, 3/8-16 Hex Side Lock
18 25139 2 NUT, 5/16-18 Hex Large Serrated Flange
19 42541 1 PIVOT CONTROL - LH (S/N: 210 & below)
20 49176 1 OPERATOR PRESENCE HANDLE - LH
21 25011-6 6 BOLT, 5/16-18 x 3/4
22 25223 2 SHOULDER BOLT, 1/2 x 1
23 25128 2 NUT, 3/8-16 Hex Serrated Flange
24 25155 4 WASHER, 5/16" SAE
25 25057 4 NUT, 5/16-18 Hex Nylon Lock
26 21098 2 BEARING, Flange
27 25013-32 1 BOLT, 3/8-16 x 4
28 49352 1 SPRING, Extension
29 48328 1 BRAKE LINKAGE ROD
30 47732 1 DUMP VALVE ROD
31 22481 2 COLLAR, Set, 1/4"
32 47740 1 LINK STUD
33 47697 1 CONTROL SHAFT ASSEMBLY
34 25010-6 4 BOLT, 1/4-20 x 3/4
35 25126 4 NUT, 1/4-20 Hex Serrated Flange
36 48547 2 THUMB CONTROL LEVER, Complete (Includes Ref No. 10 - S/N: 211 & above)
37 48544 1 PIVOT CONTROL - RH (S/N: 211 & above)
38 48545 1 PIVOT CONTROL - LH (S/N: 211 & above)
39 25127 2 NUT, 5/16-18 Hex Small Serrated Flange (S/N: 1039 & above)
40 25055-14 1 BOLT, 5/16-18 x 1-3/4 TFL (S/N: 1039 & above)
The above parts group applies to the following Mfg. Nos.:
2005
21
© Copyright Ferris Industries. All Rights Reserved.
HC32KAV13
TP 400-7077-08-HC-F